model:MRr470
Radar echo area:Greater than or equal to 40 square meters
Operating temperature range:-35 degrees Celsius plus 55 degrees Celsius
Reflector side length:470mm
Total weight (including packaging):Less than or equal to 1.5kg
Validity period:5 years
Storage method:dry place
installation method:
1. Take the reflector out of the packaging bag, unfold the conductive sheet around the stainless steel rotating shaft, and place 8 right-angled triangles down, and then insert the guide spring pin into the oval lubrication hole and rotate it 90 degrees to lock it.
2. Pull out a stainless steel support rod in the center of the stainless steel rotating shaft by about 20 cm and then tighten the plastic fixing bolt and nut.
3. Insert the 20-cm branch rod connected to the reflector into the valve body from the hole in the canopy of the survival craft, then insert it into the stainless steel lifting bracket in the raft body, and finally screw all the plastic bolts on the lifting bracket to the valve body. The raft can be fixed low.
4. Recommended installation height: the horizontal plane is greater than or equal to 2 meters
Precautions:
(1) Installation method: avoid shadow areas.
(2) The safe distance of the compass: 2 meters.
Features:
This product is small in size, light in weight, compact in structure, foldable, easy to store, easy to use, easy to disassemble and assemble, has good emission performance, large emission area, long service life, large reflection area, and the surface of the radar reflector is not easy to be corroded. It is a necessary accessory for lifeboats and liferafts. It is used for rescue at sea. It can enhance the reflection signals of lifeboats and rafts to radar electromagnetic waves, so that boats, rafts and their personnel can be searched and rescued as soon as possible.
Performance meets:IMO IMOA384(x),The MSC.164 (78) resolution of the Maritime Safety Committee and the technical requirements of the International Organization for Standardization ISO8729-1 (2010)
certified product:CCS\/EC